Name: 3DXTech ESD-PETG Filament 1.75mm
SKU: 586684

Product Details ＋

Are You Looking To Buy 3DXTech EZPC CF (Polycarbonate Carbon Fibre) 1.75mm In Australia?

3DXSTAT™ ESD-PETG is an easy to use ESD-Safe filament formulated for a wide array of applications that require electrostatic discharge (ESD) protection and enhanced chemical resistance. Made using high flow PETG copolymer and CNT’s to offer exceptional repeatability and reliability.

Benefits of PETG ESD Include:

Superior chemical resistance vs. ABS
Amorphous structure giving it low, near isotropic shrinkage
Low moisture absorption, 3x lower than ABS
Very low odor emitted while printing
Superior ductility vs. ABS
Wide processing range of 230-260°C
Consistent surface resistivity
Improved retention of impact & elongation
Low particulate contamination
Minimal contribution to outgassing and ionic contamination

TECHNICAL DATA SHEET

Click to open this material's TDS

SAFETY DATA SHEET

Click to open this material's SDS

Filament Specifications:

1.75mm /- 0.05mm in diameter

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

Typical ESD-PETG Applications Include:

Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors
Industrial: Conveying, Metering, and Sensing Applications

Target Conductivity for 3DXSTAT ESD-PETG:

10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.
Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer / application. However, please do not exceed 270°C to reduce the risk of polymer degradation.

Surface Conductivity as a Function of Extruder Temperature:

The surface resistance of the printed ESD-safe part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.